Barranca Lapidary Equipment
 Diamond Cabbing Machines and Trim Saws

Lapidary Equipment - Rock Cabbing Machines and Trim Saws

Click on photo for
larger image

*Made in USA

Lapidary Cab Grinder/Sander and Polishing Unit

This 6" combination lapidary polisher/grinder unit has three stainless steel valves to provide independent water flow to each polishing wheel and the expandable drum. A submersible water pump provides flow to the brass petcock valves that control the cooling water recirculation. The one-piece cast aluminum tank and base has sealed bearings mounted to a 5/8" stainless steel shaft. A 1/3 HP electric motor drives the shaft from a pulley belt. The end-polishing disc is ideal for final polish and buff using the Poly-Tex quick removable pads with on/off cement.

For a greater understanding of the basics on how to use a machine like this click on this link

GP-6 Carbide Wheel Cab Maker Includes:

• 100 & 200 grit 6" x 1-1/2" carbide wheels
• 400, 600, 1200 & 3000 mesh resin-bond diamond belt
• 6" x 1-1/2" rubber expandable drum
• 8,000, 14,000 & 50,000 grit diamond paste syringes
• Three Poly Tex polishing pads
• 6" convex polishing hub
• 6" leather polishing disc
• 3M™ feathering disc adhesive
• 8 oz. bottle of Tool-Cool
• Submersible water pump & hose
• Three stainless steel water control valves
• Dressing T-bar
• 1/3 HP thermal protected motor
• GFCI & power switch
• Base board & adjustable steel motor mount

Shipping weight: 90 lbs without the motor, 105 lbs with the motor.

Click here for:  Polishing discs, pads and parts for this and other Barranca equipment

See our shipping notes at the bottom of the page

This unit will be shipped direct from the factory.  It will be shipped as fast as it becomes available, we hope this to be no more than 2 weeks,
however in some cases it may be longer

Diamond Cab Grinder/Sander - Belts Polishing Unit

This 6" combination polisher/grinder unit has three stainless steel valves to provide independent water flow to each polishing wheel and the expandable drum. A submersible water pump provides flow to the brass petcock valves that control the cooling water recirculation. The one-piece cast aluminum tank and base has sealed bearings mounted to a 5/8" stainless steel shaft. A 1/3 HP electric motor drives the shaft from a pulley belt. The end-polishing disc is ideal for final polish and buff using the Poly-Tex quick removable pads with on/off cement.

Understanding  the basics on how to use a machine like this

Lapidary GP-6 Diamond Wheel Cab Maker - Belts

• 80 & 170 grit 5-7/8" x 1-1/2" brazed metal-bond diamond wheels
• 400, 600, 1200 & 3000 grit 6" x 1-1/2" mesh resin-bond diamond belts
• 8,000, 14,000 & 50,000 grit diamond paste syringes
• 6" x 1-1/2" rubber expandable drum
• Three Poly Tex polishing pads
• 6" convex polishing hub
• 6" leather polishing disc
• 3M™ feathering disc adhesive
• Submersible water pump & hose
• Three stainless steel water control valves
• 1/3 HP thermal protected 1725 RPM motor
• GFCI & power switch
• Base board & adjustable steel motor mount

Part # 8300048

Shipping weight: 90 lbs without motor, 105 lbs with motor.

Click here for:  Polishing discs, pads and parts for this and other Barranca equipment

See our shipping notes at the bottom of the page

This unit will be shipped direct from the factory.  It will be shipped as fast as it becomes available, we hope this to be no more than 3 weeks,
however in some cases it may be longer

Diamond Cab Grinder/Sander - Pads Polishing Unit

This 6" combination polisher/grinder unit has three stainless steel valves to provide independent water flow to each polishing wheel and the expandable drum. A submersible water pump provides flow to the brass petcock valves that control the cooling water recirculation. The one-piece cast aluminum tank and base has sealed bearings mounted to a 5/8" stainless steel shaft. A 1/3 HP electric motor drives the shaft from a pulley belt. The end-polishing disc is ideal for final polish and buff using the Poly-Tex quick removable pads with on/off cement.

Understanding  the basics on how to use a machine like this

Lapidary GP-6 Diamond Wheel Cab Maker - Pads

• 80 & 170 grit 5-7/8" x 1-1/2" brazed metal-bond diamond wheels
• Nine 5" resin diamond pads (50, 120, 220, 400, 800, 1,800, 3,500, 8,500 and 13,000 mesh)
• 14,000 & 50,000 grit diamond paste syringes
• 6" x 1-1/2" rubber expandable drum
• Four resin diamond belts (400, 600, 1,200, and 3,000 mesh)
• Magnetic mount Line Loc nozzle
• One 5" rubber backer pad
• 5" rigid backer pad
• 6" convex polishing hub
• Two Poly Tex polishing pads
• 5" felt buff pad
• 6" leather polishing disc
• 3M™ feathering disc adhesive
• Submersible water pump & hose
• Three stainless steel water control valves
• 1/3 HP thermal protected motor
• GFCI & power switch
• Base board & adjustable steel motor mount

Part # 8300052

Shipping weight: 90 lbs without motor, 105 lbs with motor.

Click here for:  Polishing discs, pads and parts for this and other Barranca equipment

See our shipping notes at the bottom of the page

This unit will be shipped direct from the factory.  It will be shipped as fast as it becomes available, we hope this to be no more than 2 weeks,
however in some cases it may be longer

Combination Lapidary Carbide Wheel, Trim Saw, Cabbing Machine complete with motor

This 6" combination polisher/trim saw/grinder has three stainless steel valves that provide independent water flow to both grinding wheels and the expandable drum. A submersible water pump provides cooling water recirculation. The one-piece cast aluminum tank and base has sealed bearings mounted to a 5/8" stainless steel shaft. The end-polishing disc is ideal for final polish and buff . Trim saw has a removable table top and tank drain plug for ease of oil/sludge removal.   Shown with trim saw rock vice which is sold separately.

Lapidary 6" Carbide Combo Cab Workshop includes:

• 100 & 200 grit 6" x 1-1/2" carbide wheels
• 400, 600, 1200 & 3000 mesh resin-bond diamond belts
• 6" x 1-1/2" rubber expandable drum
• Three Poly Tex polishing pads
• 6" convex polishing hub
• 6" leather polishing disc
• 3M™ feathering disc adhesive
• 8 oz. bottle of Tool-Cool
• Diamond paste compound syringes (8,000, 14,000 & 50,000 mesh)
• Dressing T-bar
• Submersible water pump & hose
• Three stainless steel water control valves
• 6" x .020 x 5/8" BD-303C Diamond Blade
• 1/3 HP thermal protected 1725 RPM motor
• GFCI & power switch
• Base board & adjustable motor mount

Part # 8300011

Shipping weight: 80 lbs without motor, 100 lbs with motor

Click here for:  Polishing discs, pads and parts for this and other Barranca equipment

See our shipping notes at the bottom of the page

This unit will be shipped direct from the factory.  It will be shipped as fast as it becomes available, we hope this to be no more than 2 weeks,
however in some cases it may be longer

Combination Lapidary Diamond Wheel, Trim Saw, Cabbing Machine complete with motor

This 6" combination lapidary polisher/trim saw/grinder has three stainless steel valves that provide independent water flow to both grinding wheels and the expandable drum. A submersible water pump provides cooling water recirculation. The one-piece cast aluminum tank and base has sealed bearings mounted to a 5/8" stainless steel shaft. The end-polishing disc is ideal for final polish and buff. The trim saw has a removable table top and tank drain plug for ease of oil/sludge removal.  Shown with trim saw rock vice which is sold separately.

6" Diamond Combo Cab Workshop includes:

• 80 & 170 5 7/8" x 1-1/2" brazed metal-bond diamond wheels
• 400, 600, 1200 & 3000 mesh 6" x 1 1/2" resin-bond diamond belts
• 6" x 1-1/2" rubber expandable drum
• Three Poly Tex polishing pads
• 6" convex polishing hub
• 6" leather polishing disc
• 3M™ feathering disc adhesive
• 8 oz. bottle of Tool-Cool
• Diamond paste compound syringes (8,000, 14,000 & 50,000 mesh)
• Submersible water pump & hose
• Three stainless steel water control valves
• 6" x .020 x 5/8" BD-303C Diamond Blade
• 1/3 HP thermal protected 1725 RPM motor
• GFCI & power switch
• Base board & adjustable motor mount

Part # 8300012

Shipping weight: 92 lbs without motor, 112 lbs with motor

Click here for:  Polishing discs, pads and parts for this and other Barranca equipment

See our shipping notes at the bottom of the page

This unit will be shipped direct from the factory.  This unit is available to be shipped within 1 to 2 weeks of placement of the order.

Lapidary SuperCab Grinder/Sander and Polishing Unit

This 8" combination lapidary polisher/grinder unit has three stainless steel valves to provide independent water flow to each polishing wheel and the expandable drum. A submersible water pump provides flow to the brass petcock valves that control the cooling water recirculation. The one-piece cast aluminum tank and base has sealed bearings mounted to a 5/8" stainless steel shaft. A 1/2 HP electric motor drives the shaft from a pulley belt. The end-polishing disc is ideal for final polish and buff using the Poly-Tex quick removable pads with on/off cement.

For a greater understanding of the basics on how to use a machine like this click on this link

GP-8 Super CabMaker Includes:

• 1/2 HP thermal protected 1725 RPM direct drive motor
• 80 & 170 grit 8" x 1-1/2" brazed metal-bond diamond wheels
• 400, 600, 1200 & 3000 mesh resin-bond diamond belts
• 8,000, 14,000 & 50,000 grit diamond paste syringes (individual 5 gram syringes)
• 8" x 3" rubber expandable drum
• Three 8" Poly Tex polishing pads
• 8" convex foam rubber lined aluminum polishing hub
• 8" flat aluminum hook & loop sanding and polishing hub
• 8" leather polishing pad
• Carbide dressing stick
• 3M™ feathering disc adhesive
• Submersible water pump & hose
• Three stainless steel water control valves
• 1/3 HP thermal protected motor
• GFCI (110V motors only)
• Base board & adjustable steel motor mount

Shipping weight: 115 lbs.

Click here for:  Polishing discs, pads and parts for this and other Barranca equipment

See our shipping notes at the bottom of the page

This unit will be shipped direct from the factory.  It will be shipped as fast as it becomes available, we hope this to be no more than 2 weeks,
however in some cases it may be longer.

1/3 HP Power Pack

$400.00

 Power Unit will fit TS-6, PF-10, Six inch Cab Combo Workshop & GP-6

• 1/3 HP, 110 Volt, 1725 RPM motor and mount
  Part # 8300288
  Shipping weight: 25 lbs.

  See our shipping notes at the bottom of the page

  This power unit will be shipped direct from the factory.