|
Lapidary Rock, Slab and Trim Saws
|
|
Are you interested
in learning more about how to do Lapidary Work?
Click here for informational books.
|
|
Click here to
see our selection of cutting rock for cutting
slabs, cabochons and specimens |
|
Click
on photo for
larger image
|
Description of Lapidary Equipment
|
 |
|
MK-145
Trim/Slab Rock Saw
$145.00
|
MK-145 Trim Slab Rock Saw
This lightweight and portable wet saw cuts rock, ceramic, marble, granite,
slate and terra-cotta wall and floor tiles up to 1" thick. It includes
2 diamond blades to include a 303 professional 4" x .020 lapidary blade as
well as a 4 1/2" x .060 tile blade.
- Built-in miter table allows for the cutting of precision 22º and
45°
- Built-in MK-Safe switch™
- Includes a 4-1/2" x .060 continuous rim blade and a 4" x .020 - 303
Pro blade
- 45 degree rip guide
- Motor: 115V/60Hz
- Horsepower - 1/2 HP
- RPM - 5,500
Part # 158252-BD; Shipping Weight is 18 lbs.
This
unit will be shipped direct
from the factory. May take up to 6 weeks.
Always wear personal protection
equipment whenever using power tools, rock picks, chisels or any other
impact tools which could cause injury or damage. Your eyes and hearing are too important not to protect.
|
|
MK-170 Rock
Trim/Slab Saw
$275.00
|
MK-170 Wet Cutting Trim
Saw
This lightweight and portable wet saw cuts rock, ceramic, marble, granite,
slate and terra-cotta wall and floor tiles up to 1" thick.
- High-torque universal motor
- High-impact thermoplastic water reservoir
- MK-Safe switch™ prevents saw from being operated when locking key
is removed
- 7" 303P Diamond blade, sharpening stick & submersible water pump
included
- Motor: 115V/60Hz, 5 Amps
- Horsepower - 1/2 HP
- RPM - 5,500
- Blade Capacity - 7", Arbor Size 5/8"
- Depth of Cut 2"
- Rip Guide
Click here for our rock slabs!
Part # 172000-BD; Shipping Weight is 25 lbs.
This
unit will be shipped direct
from the factory. May take up to 6 weeks.
Always wear personal protection
equipment whenever using power tools, rock picks, chisels or any other
impact tools which could cause injury or damage. Your eyes and hearing are too important not to protect.
Click here for our personal protection
equipment!
Click here for our saw cutting
oil!
|
|
BD-7
Trim Saw w/o Hood or Vise
$750.00
|
BD-7 Trim
Saw
The BD-7 power feed trim saw with 1/3 HP motor, is perfect for cutting
facet material, opals and rock slabs of all types. With a 7" blade
capacity, the depth of cut is 1-3/16" and the maximum vise opening is
2-3/4".
- Large 14" x 14" cutting surface
- Direct drive motor
- All cast aluminum tank, table, carriage, vise and blade guard
- Table tilts up and out of the way for blade removal//change,
adding oil or cleaning
- Easy to clean tank with oil drain hose and sludge removal plug
- Vertical rock vise clamping system
- Mounted on a 1/2" polypropylene base
- 7" 303C Professional Lapidary Diamond Blade
- Optional Manual Vise with cross feed adjustment, can be completely removed
in seconds
- Optional PETG high-impact, co-polyester hood
Watch a video of
this saw in use
Click here for our rock slabs!
Part # 170789; Shipping Weight is 28 lbs.
Part # 168765; Shipping Weight is 30 lbs.
This
unit will be shipped direct
from the factory. May take up to 6 weeks.
Always wear personal protection
equipment whenever using power tools, rock picks, chisels or any other
impact tools which could cause injury or damage. Your eyes and hearing are too important not to protect.
Click here for our personal protection
equipment!
Click here for our saw cutting
oil!
|
BD-7 Vise
$110.00
|
BD-7 Hood
$75.00
|
|
|
BD-7
Trim Saw w/ Hood & Vise
$900.00
|
|
MK-101
Complete
With Motor
$1200.00
|
|
Rock vise for the MK-100
for holding rock for
cutting
$130.00
|
|
Stand for MK-100
$110.00
|
|
MK-101 Trim Saw
The MK-101 is a portable trim saw incorporating a cooling/flushing
system with a removable plastic pan for ease of sludge removal. It can
be used on the optional folding metal stand or mounted to a table or bench. A rock vise
may be added to the saw for mounting on the sliding table and is sold separately.
MK-101 Features:
- 1-1/2 HP fan-cooled motor
- Permanently lubricated, dual-sealed, heavy-duty blade shaft bearings
- Multi position motor post cutting head for convenient cutting of various
tile sizes
- Built-in water distribution system supplies water to both sides of
blade
- Variable height cutting head for plunge cutting
- Blade guard accommodates 8" profile wheels
- Micro V-belt drive
- Linear-Bearing and chrome plated guide-bar assembly ensure precise
cutting
- Blade shaft lock for easy blade removal
- One-piece reinforced zinc-plated steel frame
- One year limited warranty, Made in the USA
|
Motor
|
115V 60Hz
|
| Horsepower |
1 1/2 HP |
| Motor RPM |
3450 |
| Blade RPM |
3450 |
|
Blade Capacity
|
10" (254mm) |
|
Arbor Size
|
5/8" (15.9mm) |
|
Depth of Cut
|
3 3/4" (96mm) |
|
Length of Cut
|
20" |
|
Diagonally Cuts
|
14" tile |
|
Size LxWxH
|
36 x 21-1/2 x 22-1/2" |
| Size (mm) |
914x584x584 |
| LxWxH (mm) |
915 x 546 x 572 |
| Accessories Included with MK-100
Saws |
| 10" 301 Wet Cutting Tile Blade |
| Rip Guide |
| Water Pump |
Shipping weight: 96 lbs.
See our shipping
notes at the bottom of the page
This
unit will be shipped direct
from the factory. May take up to 6 weeks.
Always
wear personal protection equipment whenever using power tools, rock picks,
chisels or any other impact tools which could cause injury or damage. Your
eyes and hearing are too important not to protect.
Click here for our personal protection
equipment!
|
|
BD-10
Complete
With Motor
$1775.00
|
|
BD-10 Power Feed Trim
Saw
Introducing the Barranca Diamond BD-10 power fee trim
saw with 1/3 HP motor, it's perfect fro cutting facet material, opals and
rock slabs of all types. Cut large slabs easily with the 15-3/8" x 19-1/2"
work surface.
BD-10 Features:
- All cast aluminum tank, table, blade guard, and power fee box
- Hinged table top for ease of slude/oil and blade removal
- Vertical rock vise clamping system
- Vise rotates out of the way for manual trim saw use
- Sealed blade arbor-bearing assembly
- Clear plexiglass hood
- Brass clutch plate engage/disengagement system
- Single speed (3/16" per minute feed rate) power feed system
- Mounted on a 1/2" polypropylene base
- 303C Professional Lapidary Diamond Blade (10 x 0.040 x 5/8)
|
Motor
|
110V 60Hz
|
| Horsepower |
1/3 HP |
| Amperage |
5.8 |
| Motor RPM |
1725 |
|
Blade Shaft
|
1/2" |
|
Blade Capacity
|
8"-10" |
|
Depth of Cut: Manual Cutting
|
3" |
|
Depth of Cut: Power Feed Cutting
|
2 5/8" |
|
Max Vise Opening
|
3 1/4" |
|
Blade Size
|
10" |
| LxWxH |
27" x 17" x 19" |
| Saw Weight |
70 lbs |
| Shipping Weight |
80 lbs |
| Part # |
168787 |
| 220 Volt/50Hz Part # |
169201 |
220 volt 50 Hz motors are available for export
customers by
special order at additional cost.
Watch a
video of this saw in use
See our shipping
notes at the bottom of the page
This
unit will be shipped direct
from the factory. May take up to 6 weeks.
Always
wear personal protection equipment whenever using power tools, rock picks,
chisels or any other impact tools which could cause injury or damage. Your
eyes and hearing are too important not to protect.
Click here for our personal protection
equipment!
Click here for our saw cutting
oil!
|
|
Highland Precision
14" Rock Saw
complete with
14" Blade
$3650.00
|
|
Optional Stand
Part # 166153
$150.00
|
|
Highland Precision 14"
Rock Saw
The HP14 Precision 14" Slab Saw is the newest addition
to Barranca's line of Rock Saws. This is a nice smaller size
production saw with an automatic screw drive shutoff. It has a 3/16"
per minute automatic feed rate and the standard type splash-style
lubrication for flushing and cooling the blade. Included with the
saw is a 14"- 301 Supreme notched blade.
HP14 Features:
- 1/2 HP continuous duty commercial grade motor with thermal
overload protection and manual reset
- Fully sealed drive shaft bearing housing
- Heavy duty cast iron carriage and rock vise
- Screw drive vise carriage with automatic shutoff
- Silicon bronze clutch block carriage feed engagement system
- Geardrive motor provides feed rate of 3/16 inch per minute
- Powder coated reservoir and hood
- Splash-style lubrication, flushing and cooling system
- Includes a 14" 301 Supreme notched rim diamond blade
|
Motor
|
Baldor
|
| Power |
1/2 HP, 110V |
| Amperage |
8 |
| Blade Capacity |
12" - 14" |
|
Depth of Cut
|
5" |
|
Vise Opening
|
5 3/4" |
|
Blade
|
14" BD-301 |
|
LxWxH
|
41" x 27" x 19" |
| Saw Weight |
170 lbs |
| Shipping Weight |
230 lbs |
| Part# |
8302014 |
220 volt 50 or 60 Hz motors are available for export
customers by
special order at additional cost.
Watch a
video of this saw in use
See our
shipping notes at the bottom of the page
This
unit will be shipped
direct from the factory.
Always
wear personal protection equipment whenever using power tools, rock picks,
chisels or any other impact tools which could cause injury or damage. Your
eyes and hearing are too important not to protect.
|
|
|
|
SS18" Lapidary
Rock Saw
On Sale
$4950.00
|
|
SS18" Lapidary
Rock Saw
with 20" Blade
On Sale
$5100.00
|
|
SS24" Lapidary
Slab Saw
$6100.00
|
|
SS18" Lapidary Rock Saw
The Galaxy lapidary slab saws are manufactured of top-quality steel and
cast iron parts at the Barranca Diamond Products plant in Gardena, CA. The
carriage rock vise employs a bronze clutch screw feed system powered by
a continuous duty drip proof thermal-protected electric motor. The motor
powers a screw drive system with automatic shutoff. Large capacity oil/sludge
reservoir uses a splash-style lubrication, flushing and cooling system.
| Model # |
SS18 |
SS24 |
| Motor |
Baldor |
Baldor |
| Horsepower |
1.5 Hp |
1.5 Hp |
| Voltage1 |
120V, 60 Hz |
120V, 60 Hz |
| Amperage |
8 |
8 |
| Blade Capacity |
16", 18", 20" |
20", 24" |
| Max. Depth Of Cut2 |
5.75 - 7.5" |
7.5 - 9" |
| Max. Vise Opening |
8" |
17" |
| Shipping Weight |
580 lbs. |
720 lbs. |
| Blade |
18"- 301 or 303 Blade |
24" - 301 or 303 Blade |
| Part # |
8302018 |
8302024 |
|
Each lapidary
saw includes 301 Premium notched rim blade or a 303 Professional segmented
rim blade as indicated |
| Warranty Period: 1 year
from date of purchase against all manufacturing or material defects. |
|
A crating charge
of $250.00 applies which is not included in the price for the SS18, SS24.
|
1 220 volt 50 or 60 Hz motors are available
for export customers by special order at additional cost.
2 Depth of cut with maximum diameter blade.
See our shipping
notes at the bottom of the page
This
unit will be shipped direct
from the factory. May take up to 6 weeks.
Always
wear personal protection equipment whenever using power tools, rock picks,
chisels or any other impact tools which could cause injury or damage. Your
eyes and hearing are too important not to protect.
Click here for our personal protection
equipment!
Click here for our saw cutting
oil!
|
|
You may also want to view our
Lortone Saws |
